SWPB – Low Voltage Switch
SWCAN – Digital Addressable Control Station
XPS – Small Contactor Expansion Panel
The hinged cover NEMA 1 type enclosure includes a terminal block and DIN rail capable mounting a maximum of six 4 or 8-pole contactors.
XPL – Large Contactor Expansion Panel
The hinged cover NEMA 1 type enclosure includes a terminal block and DIN rail capable mounting a maximum of six 4 or 8-pole contactors.
NEMA3RS/NEMA3RL – Extreme Outdoor
These enclosures have a size range of 6 x 4 x 4-in. to 12 x 12 x 10-in. and meet basic functionality requirements for applications that require protection from rain, sleet, snow or dripping water.
NEMA4XS/NEMA4XL – Stylized Indoor Outdoor
For use in indoor or outdoor applications, these stylized enclosures protect components and controls in corrosive environments.
NEMA12S/NEMA12L – Streamlined Styling Indoor
Enclosures are ideal for machine control applications. With streamlined styling, flush quarter-turn latches and an attractive, durable finish. Available in solid or window single-door and two-door landscape, flush-mount and sloped-top versions for application and mounting flexibility. Two-door landscape models provide full-width access and easy panel installation.
PHR – Panel Heater
Used in outdoor enclosures to fight condensation and maintain operating temperatures. The PHR panel heater is a silicone flexible heater that can detect internal temperature and is corrosion resistant. UR, cUR, VDE approved, easy to bond, fiberglass reinforced and lightweight.
OP4 – 4-Pole Normally-Open Contactor / 20A / 120V Coil
Electrically held contactor poles are open in de-energized state 20A 600VAC.
OP8 – 8-Pole Normally-Open Contactor / 20A / 120V Coil
Electrically held contactor poles are open in de-energized state 20A 600VAC
CP4 – 4-Pole Normally-Closed Contactor / 20A / 120V Coil
Electrically held contactor poles are closed in de-energized state 20A 600VAC
DA-4 – Four-Channel Dimming Amplifier (C-Series Controllers)
Used primarily for offices and warehouses requiring dimming of any fluorescent, electronic, 0-10V dimming ballasts, and HID electronic dimming ballasts.
PLS4 – Individual Override (Optimized for LCM Series Controllers)
Converts maintained dry contact closures to polarity reversing signal to drive Panasonic WR-6161-K8 low voltage relays and WR-6172-84 (double pole) 480 volt relays. The board has 4 input channels and 4 output channels, and is powered by 24VDC.
M-SIM –Sensor Simulator (LC8 Controller)
The M-Simulator is used to calibrate and set-up the LC8 controller to function in the range of the target sensor.
FLB – Warning Beacon for HID Sweeps
COUSB – USB-A / MINI-B 6-Ft Cable (R-Series)
COMSD2 – Micro SD Card, 2GB (R-Series)
COMSD2A – Micro SD Adapter (R-Series)
COMSDUA – Micro SD USB Adapter (R-Series)
